SynQor MPC-1500 Series, Operator'S Manual

Page: 9 / 48

Section II General Product Information
006-0006452 MPC-1500 Operator Guide Rev P 9 of 48 03/03/2021 www.synqor.com
Part Numbering Scheme and Options
This table shows the part numbering scheme for the full line of SynQor MPC products:
Base Model
Model Number Power Height (W x D x H) Weight
MPC-1500-1S 1250 W 1500 VA 1U (17.00” x 14.80” x 1.73”) 22 lbs.
MPC-1500-1U 1250 W 1500 VA 1U (17.00” x 21.60” x 1.73”) 24 lbs.
Base Model
Options Options
AC
Input
Freq
AC
Output
Voltage
AC
Output
Neutral
Wire
AC
Output
Set Point
Freq
DC
Input
/ DC2
Output
DC1
Output
Additional
Options
AC Input
Freq
L
W
47-65 Hz
47-800 Hz
AC Output
Voltage
1
2
115 Vrms
230 Vrms
MPC-1500-1U
MPC-1500-1S
L
W
1
2
S 00
-E
00
CE
D 12
G 5 M 15
AC Output
Neutral
Wire
G
F
R
Grounded
F 6 P 24 Floating*
R 4 R 28 AC Output Electronic Breaker*
V 40
AC Output
Set Point
Freq
5
6
4
50 Hz
60 Hz
400 Hz
W 50
Not all combinations make valid part numbers, please contact SynQor for availability.
See the Product Summary web page for more options.
DC Input /
DC2
Output
S Not Installed
*Notes: D DC Input
Order “F: Floating” option when configuring the AC output for multi-unit combinations M DC2 Out 24 VDC with Droop Share
of up to 3 units. P DC2 Out 24 VDC No Share
Order “R: AC Output Electronic Breaker” option for fault-tolerant, R DC2 Out 28 VDC with Droop Share
glitch-free parallel systems of up to 32 units with N+M redundancy. V DC2 Out 28 VDC No Share
The AC output neutral wire will not be connected to the chassis. W DC2 Out 50 VDC No Share
DC1
Output
00 None
12 12 V
Examples:
15 15 V
MPC-1500-1U-L1G6D28-ECE, 24 24 V
MPC-1500-1S-L1F4S00-E00 28 28 V
40 40 V
50 50 V
Additional
Options
-E Ethernet/SNMP with Configuration Loading
00 No CE Marking
CE CE Marking
The MPC-1500 Series of products provide up to 1500 VA and 1250 W of total output power
(AC plus DC), in the following physical format:
• 1U height. 22 lb. or 24 lb. weight, 14.8” or 21.6” depth respectively.
Various options can be specified according to the part numbering scheme shown in the table:
• The allowable frequency of the AC INPUT can either be in the 47-65 Hz range (for 50 Hz and / or 60
Hz systems) or Wide-range in the 47-800 Hz range (for 400 Hz and Variable Frequency systems).
• The output voltage of the MPC-1500 Series can be 115 Vrms or 230 Vrms.
• The AC output can be configured with its neutral wire internally grounded to the chassis of the
MPC or left floating for shipboard applications.
• The Electronic Breaker option adds fault tolerant, glitch free operation multi-unit for N+1 or
N+M redundancy. This option also allows up to 32 unites total in Single Phase, Split Phase or
3-Phase system.