SynOptics SYNBIOSIS aCOLyte3, User Manual, Page: 20 / 110

Capturing images
6. Type the length of the known feature into the calibration edit box:
7. Press
to set the calibration and return to the main aCOLyte3 window.
Viewing batch images
By default (see System settings , page 92), when you create a new batch, the image used to set
it up (see Setting up batches , page 24) is saved with the batch, and then, after you have
accepted the batch design, each time you take a measurement in Measurement mode, the
captured image is also saved with the result in the batch.
To view the batch setup image and images used for measurements:
1. Press
to display a dialog box:
The box on the left-hand side lists the batch images, beginning with the batch setup
image followed by the measurement images listed in order of their plate identifiers –
expanding the measurement image items (as in the picture) shows the dilutions.
2. To view a measurement image, click on the plate identifier.
To view the batch setup image, click on the batch identifier (the top line).
14 aCOLyte3 User Manual