Synology RackStation RS217, Hardware Installation Manual

Page: 11 / 16

LED Indicator Color Status Description
STATUS
Green Static Volume normal
Orange Blinking
Volume not created
Volume degraded / Volume crashed
DSM not installed
Off HDD hibernation
Rear LAN
(on right side of jack)
Green Static Gigabit connection
Orange Static 100 Mbps connection
Off 10 Mbps connection or no network
Rear LAN
(on left side of jack)
Green
Static Network connected
Blinking Network active
Off No network
DISK 1-2
Green
Static Drive ready and idle
Blinking Accessing drive
Orange Static Drive error / Port disabled
1
Off No internal drive
Power
Green
Static Powered on
Blinking Booting up / Shutting down
Off Powered off
Note: This table is applicable to Synology NAS running DSM 6.2.3 and earlier. For DSM 6.2.4 and above, please refer to this article for the latest information.
LED Indicator Table
B
11
Appendix
1
Please try to restart your RackStation or re-insert the drive(s), and then run the HDD/SSD manufacturer's diagnostic tool to check the health status of the
drive(s). If you can log into DSM, please run the built-in S.M.A.R.T. test to scan the drive(s). If the problem remains unresolved, please contact Synology
Technical Support for help.