Synology NAS FS6400, Hardware Installation Manual, Page: 15 / 32

15
Chapter 2: Hardware Setup
d
Put back and fasten the screw that you removed in step 3-a so as to secure the newly inserted card.
d
c
4
Repeat step 3 to install the other add-in card for your FS6400.
5 Put back the rear top cover by following step 4 of the To install the RAM module section.
Install and Remove Rail Kits
Here we use RKS1317 as an example to illustrate how to install or remove the rail kits. For more information
about the rail kit installation, please refer to the Quick Installation Guide that comes with the rail kit.
To install the rail kit:
1
To install the rail kit to the rack
a
Attach the rear end of the rail kit assembly to the rack.
b Slide the front latch outwards and insert the brackets into the rack holes.