minute to turn on Synology Server.
2.
To turn Off Synology Server, press the Power
Button until you hear a "beep" and the Power
LED begins blinking. The shutdown process
will complete in 30 seconds.
COPY Button Front Panel
The COPY Button lights up when you connect a
USB Device (for example: digital camera, USB flash
disk). Pressing the button will copy the data from the
connected USB device to the Synology Server's
internal HDD.
USB Port
Front Panel
The Synology Server offers 3 USB ports for adding
additional external hard drives, USB printers, or
other USB devices. One at the front, and other two
at the back.
Smart Fan
Ventilation
Front Panel
The Smart Fan is to exhaust waste heat out of the
Synology Server. The Smart Fan will start
automatically when the internal system temperature
reaches 46 °C. If the fan is malfunctioning, system
will "beep" every 1 second.
eSATA Port
Back Panel The eSATA port is for connecting with an external
SATA HDD.
RESET
Button
Back Panel 1.
To restore IP, DNS, passwords for the "admin"
account to default value, and reset the “guest”
account to the “enabled” status. (Please refer
to “Resetting Administrator Password”
chapter.)
2.
To reinstall the Synology Server. (Please refer
to “Reinstalling Synology Server” chapter.)
LAN Port
Back Panel The LAN port is where you connect RJ-45 cable to
Synology Server.
DC IN 12V
Port
Back Panel The DC IN 12V Port is where you connect the AC
Power Adapter.
LED Indication Descriptions Table
LED
Indication
Color
Status
Description
Blinking
y
During System boot-up
y
During System shutdown
Solid Light
System Ready
Power BLUE
Light Off
Power Off
Solid Green Light Used HDD Capacity below 85%
Status Green/Orange
Solid Orange
Light
y
Used HDD Capacity between
85% - 95%
y
HDD has not been formatted
12
