Title
1
G:BOX Chemi XRQ Installation – Quick Guide
1.
Darkroom with epi white lighting (factory fitted)
2.
Camera with lens, close–up lens and UV filter (factory fitted)
3.
UV transilluminator
4.
GeneSys and GeneTools software
5.
USB to serial/COM port converter
6.
All required cables
System components
CAUTION:
Do not connect power supply to any of the components until you are instructed
to below. For assistance please contact your supplier or Syngene directly
Camera
1.
Connect the camera power cable (9-way D-type connector) to
the back of the darkroom (port labelled ‘camera’) (
Figure 1
)
Camera
port
2.
Place the camera on top of the darkroom (first remove lens cap if fitted, pull off lens
cap, DO NOT screw off or you will remove filters) on top of the darkroom with the
bracket facing the rear and connect the camera power cable (the DC power end) to
the camera (
Figure 2
).
1.
Connect power cable to the back of the darkroom
Figure 1
Figure 2- XRQ
camera
Darkroom set-up
Camera USB
cable
Camera power
cable
