6
RECOMMENDED TOOLS & SUPPLIES
•
Multi Meter –
reads volts, amps and ohms
(The Fluke T5
-
600 is recommended)
•
Heat Shrink Gun or Torch
•
Vacuum with a Hose
•
Compressed Air
•
Descaler –
Citric Acid
•
Flashlight
•
Box Knife
•
Thread Sealant –
Red and Blue Loctite
•
Food Grade Grease (Super Lube) 1.8600
•
Tube Bender for
1/4”, 5/16”,
and
3/8”
Tube
•
Flare Tool
-
45°
•
Tube Cutter
•
Brass Bristle Wire Brush
•
3/8”
Drive Socket Wrench with
7/16”, 1/2”
and
9/16” “
Deep Sockets
”
•
Hammer Medium Size Ball Peen
•
Wire Stripper / Crimper
•
Small Punch and Chisel
•
3/8”
ID rubber tube for draining
•
Small Files –
Round and Triangular
•
Picks –
Straight and Curved, an Ice Pick is great for
replacing portafilter gaskets
•
Dies:
1/8”
NPT,
1/4”
NPT, and
1/8”
BSPP
•
Taps: 8
-
32, 10
-
32, 3/8 –
16,
and M6 x 1
bottoming Tap
•
Allen Wrenches:
3/32”, 1/8”, 9/64”, 5/32, 3/16”,
1/4”
(steam valve seat)
•
Wrenches: 2x11/32, 1/4, 5/16, 3/8, 2x7/16, 1/2,
2x9/16 , 5/8, 11/16, 3/4, 12mm & 17mm
•
Adjustable wrenches: Medium size 1
1/4”
opening and Small for tight spots
•
Pliers: Channel Lock, Standard pliers and Side
Cutters
•
Philips Head Screwdrivers: #2 short, #2 long and
#1
•
Flat Head Screwdrivers: #2 short, #2 medium
length, #1 medium, #0 medium
•
A large flat head screwdriver (or small flat nail
puller) to use as a pry bar or wedge.
•
Pen and paper
•
Hand cleaner and Towels
Tools and recommended items required to fully diagnose, service and maintain
Synesso espresso machines.
START UP SCREEN
The serial number contains important information:
2
—is the number of brew groups on this machine
03
—is the month the machine was built
18
—is the last 2 digits of the year it was built
4277
—is the machine sequence number
When power is turned on, this
screen is shown, displaying the
software version and serial
number.
