SALT ADDED
1 spoon = 0.5 gram
1ST CYCLE
The Echo Clean™ LED lights turn pink/purple while processing with 0.5 grams (1 spoon)
of salt. After about 1 min. 45 sec., process completes and the LED lights turn green.
At this
point, the water in the Echo Clean™ contains ~50 ppm of hypochlorous acid (HOCl) and
sodium hypochlorite (NaClO).
2ND CYCLE
If you would like a higher concentration of hypochlorous acid (HOCl) and sodium hypochlorite
(NaClO), run the Echo Clean™ through a second processing cycle. DO NOT ADD ANY MORE SALT.
The LED lights will turn pink/purple while processing. After about 1 min. 45 sec., once
processing is finished, the LED lights will turn green.
At this point, the water in the Echo
Clean™ contains ~100 ppm of hypochlorous acid (HOCl) and sodium hypochlorite (NaClO).
3RD CYCLE
If you would like a higher concentration of hypochlorous acid (HOCl) and sodium hypochlorite
(NaClO), run the Echo Clean™ through a third processing cycle. DO NOT ADD ANY MORE SALT.
The LED lights will turn pink/purple while processing. After about 1 min. 45 sec., once
processing is finished, the LED lights will turn green.
At this point, the water in the Echo
Clean™ contains 200+ ppm of hypochlorous acid (HOCl) and sodium hypochlorite (NaClO).
1ST CYCLE
The Echo Clean™ LED lights will turn blue while processing with no salt. After about 2 min. 50
sec., the LED lights will turn green, indicating that the process is complete.
At this point, the
pH of the water will be 5.5.
2ND CYCLE
The Echo Clean™ LED lights will turn blue while processing with no salt. After about 2 min. 50
sec., the LED lights will turn green, indicating that the process is complete.
At this point, the
pH of the water will be 5.
NO SALT ADDED
06
USES
Cleaning water without salt may be used on the skin for issues such as acne or eczema.
1st Cycle
2nd Cycle
2 min. 50 sec.
2 min. 50 sec.
Processing Time
Blue
Blue
LED Color
pH of Acid Water
5.5
5
USES
Only use acid water with salt on inorganic material.
TYPE OF SALT
Only use 99% refined salt (included).
ppm HOCl & NaClO
0
0
1st Cycle
2nd Cycle
1 min. 45 sec.
1 min. 45 sec.
Processing Time
Pink/Purple
Pink/Purple
LED Color
pH of Acid Water
5
5
ppm HOCl & NaClO
~50
~100
3rd Cycle
1 min. 45 sec.
Pink/Purple
5
200+