Synel SY-760, User Manual

Page: 55 / 106

-
53
4 Formatting the memory if a crash occurs
If the memory crashes a CRASH message will appear. You will need to clear the terminal’s memory
and return the terminal to the NO PROGRAMMING state according to the procedure below.
1. Press 6 times on the 0 key. An asterisk appears for each time that this key is pressed.
2. Press on the Enter key once.
3. Press 3 times on the line up key.
4. Press twice on the line down key.
5. Press 3 times on the line up key.
The message CLEAR MEMORY? will appear on the display.
6. Press once on the line down key.
7. The message MEMORY CLEARED will appear on the display.