Synectix CALL-A-MATIC ONO-7 Quick Reference Manual Download Page 1

Page: 1 / 2

ONO-7

CALL-A-MATIC ONO-7

Call Accounting System

Quick Reference Guide

Installation in a DHCP Network :

Plug in the network cable from the LAN into the socket

marked “ETHERNET” on the front panel of the unit.

Power up the unit.

Wait until the “PWR” LED starts blinking on the front panel

(approx. 3 minutes).

Open the Windows Explorer on your PC or Laptop connected

to the same network as the ONO-7 unit.

Click on “Network” on the left panel and see the devices

available on the network.

You should see the ONO-7 unit as “Callamatic

00:14:BC:xx:xx:xx”, where xx is the latter half of the MAC

address which is printed on the Serial Number sticker on the

bottom of the unit.

Double click on the unit to open the device’s webpage in the

browser on your PC / Laptop.

Programming the Settings

Click on the “User” icon on the top right hand corner of the web page, select the

“Settings” option; click on the “Settings” and you will be asked to “Sign In” by

entering the password.

Enter the default User Password “123456” and “Sign In”.

Summary of Contents for CALL-A-MATIC ONO-7

Page 1: ...Click on Network on the left panel and see the devices available on the network 6 You should see the ONO 7 unit as Callamatic 00 14 BC xx xx xx where xx is the latter half of the MAC address which is...

Page 2: ...R input is through the Ethernet port then select the IP Settings option and program the parameters as required Network Settings If the unit is currently in DHCP mode and you need to set it to a Static...