SynCardia Companion 2 Driver System, Operator'S Manual

Page: 113 / 134

SynCardia Systems, LLC
Companion 2 Driver System Operator Manual
Page 113 of 132
Chapter 20. Equipment Maintenance and Care
20.1 Maintenance
Hospital personnel should complete the Companion 2 Driver System
Check (
Appendix A ) upon receipt, prior to use, and every 6 months if the
Driver is not in use.
In addition, SynCardia will track the Driver runtime and notify the center
when a Driver is due for scheduled service.
The Driver Caddy may require air to be added to the tires periodically.
CAUTION
DO NOT modify this equipment without authorization of the
manufacturer.
20.2 Equipment Care
The equipment must be maintained in order for it to work properly.
20.2.1 Do not expose the Driver to temperatures higher than 40°C
(104°F) or lower than 4.5°C (40°F) for long periods of time.
20.2.2 To prevent a high temperature alarm, do not block the air inlets on
the sides of the Driver.
20.2.3 Do not submerge the Driver or expose it to excessive water.
Protect it from showers, baths, and liquid spills.
20.2.4 Do not use paint, paint remover, finger polish remover, or other
solvents anywhere near the Companion 2 Driver System.
20.3 Cleaning the Equipment
20.3.1 Use extreme care when cleaning the equipment. Dust the
equipment periodically with a soft, clean cloth.
20.3.2 If heavy dirt needs to be removed from the outside of the Driver,
Hospital Cart or Driver Caddy, use cloth and mild soap and wipe.
CAUTION
DO NOT soak any item of the Driver during cleaning.
DO NOT allow water to come in direct contact with the Driver electrical
connectors.