Sportline® and SYNC™ are trademarks of SPORTLINE,
a division of EB Sport Group, Hazleton, PA 18202
The Bluetooth® mark and logos are owned by Bluetooth SIG, Inc.
MapMyRun™ is a registered trademark of MapMyFitness, Inc.
All Rights Reserved. ©2013
Distributed in the UK by
EB Brands (UK), Worcester, WR4 9FA
SP3010IS01SYN
USER GUIDE
/INSTRUCTION MANUAL
WWW.SYNCACTIVE.COM
SYNC™ GPS harnesses the power of your smartphone and transmits the
data to the watch. Sophisticated GPS tracking, satellite-based speed and
distance, and a running tab on your calorie burn are now all at a quick
glance when you are in motion.
(Please visit
www.syncactive.com/compatibility
for a complete list of compatible devices.)
Downloading the MapMyRun™ Application:
If not already a MapMyRun™ user, you will need to download the FREE
application and register as a new user.
If you are an existing MapMyRun™ user, please ensure you have
downloaded the most recent version of the MapMyRun™ software by
checking your application updates.
For a complete tutorial regarding downloading, installing, and using the
MapMyRun™ application, please visit:
www.syncactive.com/tutorial
ACTIVATING WATCH:
To save power during shipping, your watch has been deactivated.
PRESS & HOLD any button for 3 seconds to activate.
OVERVIEW
1
MODES OF OPERATION
2
5
4
PAIRING YOUR WATCH
The SYNC™ GPS main modes of operation can be accessed by PRESSING the
MODE
button.
TIME
– Displays the day, time, date
DISTANCE
– Shows distance covered during workout in main viewing area
PACE
– Shows pace in main viewing area
CALORIES
– Shows calories burned during workout in main viewing area
CHRONO
– Stopwatch function
INTERVAL (Timer)
– Series of programmable timers that allow you to enhance your
running routine
ALARM
– Daily alarm
The SYNC™ GPS is designed to link with your smartphone and receive all of
the same fitness metrics that are being recorded and displayed by
MapMyRun™, including GPS accurate speed and distance.
TIME DISTANCE
PACE
CALORIE
TIMER
ALARM
CHRONO
3
SETUP |
SYSTEM SETTINGS
PROGRAMMING THE WATCH:
1.
PRESS & HOLD the
MODE
button for 3 seconds to enter the settings mode.
2.
PRESS the
START/STOP
or
LAP
buttons (increase/decrease) to adjust the value of
the flashing setting.
3.
Press
MODE
to confirm the value and move to the next setting.
4
. You will automatically exit settings when all values are confirmed or PRESS &
HOLD the
MODE
button to exit early.
6
USING MAPMYRUN™ AFTER PAIRING
LAP
•RECORDS A LAP
•CHANGES BOTTOM LINE
OF DATA IN WORKOUT SCREENS
•CHANGES TOP LINE OF DATA
IN WORKOUT SCREENS
[PRESS & HOLD]
LIGHT
START/STOP/RESET
•PAIRS WATCH TO PHONE
•STARTS & STOPS
TIMER, STOPWATCH
& WORKOUTS
•RESETS WORKOUT
(PRESS & HOLD)
SYNC
GPS
TM
MANUAL WORKOUT
TIMER ACTIVATED
CONNECTED TO PHONE
ALARM ON
REPEAT TIMER
LOW BATTERY
PRESS MODE BUTTON (LOWER LEFT BUTTON)
HOLD FOR
3 SECONDS TO
ENTER SETUP
ACCEPT ENTRY
& GO TO THE
NEXT SETTING
HOLD FOR 3 SECONDS
TO EXIT SETUP
ADJUST
SETTING
VALUE
seconds
SYSTEM SETTINGS
hours
minutes
year
month
day
12/24hr
key tone
weight
contrast
stride length
height
unit of measure
birthday year
gender
2
1
3
! IMPORTANT:
Due to continuous application enhancements, the included
instructions may be outdated. For the latest instructions, please visit:
www.syncactive.com/tutorial
After successfully pairing the watch, it should
automatically be detected by the application in
the future once the pairing button is pressed
on the watch.
1.
Always ensure that Bluetooth is on in
the main phone settings and then open
the MapMyRun™ application.
2.
On the watch, PRESS the top right
button (
ST/STP
) and the watch will enter
PAIRING mode (Fig.1) and then connect to the
phone.
3.
From the main homepage of MapMyRun™
tap
RECORD
>
START
. The application will
begin recording your workout and the same
fitness data will be transmitted to your watch which you can view in the Workout
MODE screens. The Bluetooth icon on the watch should remain lit at all times to
indicate the watch is connected.
Note:
If the watch does not seem to be paired and receiving data, go to the
MapMyRun™ Settings and select
Heart Rate & Other Sensors > SYNC GPS
Watch
and ensure that Sync™ GPS indicates "PAIRED" status. If it does not, you
will need to pair it again.
5.
When you have completed your workout, press the stop button on the
application and all your data will be saved to MapMyRun™ . The data will not be
saved to the watch.
6.
To unpair the watch from the phone go to the Time screen, PRESS the
ST/STP
button to enter Pairing mode, then PRESS & HOLD the
ST/STP
button
again.
MODE
•CHANGE MODES
•HOLD TO ENTER
SETTINGS
Downloading the MapMyRun™ Application:
If not already a MapMyRun™ user, you will need to download the FREE
application and register as a new user.
If you are an existing MapMyRun™ user, please ensure you have
downloaded the most recent version of the MapMyRun™ software by
checking your application updates.
! IMPORTANT:
Due to continuous application enhancements, the included
instructions may be outdated. For the latest instructions, please visit:
www.syncactive.com/tutorial
1.
Within the main settings of your
smartphone, ensure that Bluetooth is
turned ON and that the Bluetooth
symbol is displayed at the top of
your smartphone screen (Fig.1).
Note:
You will not see the SYNC™
GPS watch as a connection option in
the main Bluetooth settings, those
connections will be made inside the
MapMyRun™ application.
2.
Open the MapMyRun™ application and
from the settings menu, select
Heart Rate
& Other Sensors > SYNC GPS Watch.
3.
From the Time screen of the watch, PRESS
the top right button (
ST/STP
) and the watch will
enter PAIRING mode (Fig.2).
4.
On the application, tap the PAIR button and the application will begin
pairing with the device. It can take up to 15 seconds to pair. Sometimes it
may take 1 or 2 tries before pairing is successful.
5.
The watch will display a "PAIRED" message once successfully paired,
and the Bluetooth icon on the watch screen and smartphone will remain
lit.
6.
Once paired successfully, you may exit the settings screens back to the
homepage and begin using the MapMyRun™ application to actively record
your workouts.
For troubleshooting, please visit:
www.syncactive.com/tutorial
Notes:
To unpair your watch from your phone. From the Time screen on the
watch, enter Pairing mode by PRESSING the
ST/STP
button. Then PRESS
& HOLD the
ST/STP
button.
IN THE TIME SCREEN:
PRESS TO PAIR
PRESS, THEN PRESS
& HOLD TO UNPAIR
(FIG.1)
(FIG.2)
(FIG.1) PAIRING WATCH TO PHONE
IN THE TIME
SCREEN:
PRESS TO PAIR
PRESS, THEN
PRESS & HOLD TO
UNPAIR
CONNECTED
TO PHONE
= BLUETOOTH
ON
SP3010IS01SYN
16” X 11”
8/13/13 Niko
