manualshive.com logo in svg

SYNAPTICON SOMANET OBLAC Drives Box, Commissioning And Tuning, Page: 11 / 67

Share
Download
SYNAPTICON SOMANET OBLAC Drives Box Commissioning And Tuning Download Page 11

​

1.2 OBLAC Drives Virtual Machine

Important

Important

This section is only required if you are 

This section is only required if you are 

not

not

 using 

 using 

OBLAC Drives Box

OBLAC Drives Box

1.2.1 Prerequisite

OBLAC Drives Virtual Machine should be run on a virtualization software such as VMware Player
version 14 or above for Windows and Linux or VMware Fusion 10 for macOS.

Note

Note

OBLAC Drives is an application that runs in a Web Browser. We recommend the latest version of

OBLAC Drives is an application that runs in a Web Browser. We recommend the latest version of

Google Chrome.

Google Chrome.

​

1.2.2 Getting started

1.  Download the OBLAC Drives Virtual Machine image

DOWNLOAD OBLAC DRIVES

If you have trouble downloading from Amazon webservice, please try our Baidu server:

DOWNLOAD OBLAC DRIVES FROM BAIDU

Windows

2.  Install and open VMware Workstation Player

Note

Note

ANY version of VMWare Workstation Player starting from 14.0 can be used for OBLAC Drives.

ANY version of VMWare Workstation Player starting from 14.0 can be used for OBLAC Drives.

3.  Open a virtual machine

4.  Select the downloaded OBLAC Drives image (OVA file) and import it to VMware Player

Commissioning and Tuning with SOMANET OBLAC Drives

© 2020 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich   Documentation v 3.2.0 | Build: 2020-05-25

11/67

Summary of Contents for SOMANET OBLAC Drives Box




































































Reviews:

No comments