DOC-1000198-B-1
REGULATORY INFORMATION AND
CERTIFICATIONS
RF Exposure Statement:
This equipment complies with
FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and
operated with minimum distance of 20cm between the
radiator and your body. This transmitter must not be co-
located or operating in conjunction with any other antenna
or transmitter.
Industry Canada (IC) certifications:
This digital
apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio
Interference Regulations of the Canadian Department of
Communications.
Le present appareil numerique n’emet pas de bruits
radioelectriques depassant les limites applicable aux
appareils numeriques de la class B prescrites dans le
Reglement sur le brouillage radioelectrique edicte par le
ministere des Communications du Canada.
FCC certifications and regulatory information (USA
only)
FCC Part 15 Class B:
This device complies with part 15 of
the FCC rules. Operation is subject to the following two
conditions: (1) These devices may not cause harmful
interference, and (2) These devices must accept any
interference received, including interference that may
cause harmful operation.
RADIO FREQUENCY INTERFERENCE (RFI) (FCC
15.105):
This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following measures: (1)
Re-orient or relocate the receiving antenna; (2) Increase
the separation between the equipment and the receiver;
(3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected; (4)
Consult the dealer or an experienced radio/TV technician
for help.
Declaration of Conformity (FCC 96-208 & 95-19):
Synapse Wireless, Inc. declares that the product name
“IIOT-REPEATER” to which this declaration relates, meet
the requirements specified by the Federal Communications
Commission as detailed in the following specifications:
Part 15, Subpart B, for Class B equipment
FCC 96-208 as it applies to Class B personal computers
and peripherals
This product has been tested at an External Test
Laboratory certified per FCC rules and has been found to
meet the FCC, Part 15, Emission Limits. Documentation is
on file and available from Synapse Wireless, Inc.
If the FCC ID for the module inside this product enclosure
is not visible when installed inside another device, then the
outside of the device into which this product is installed
must also display a label referring to the enclosed module
FCC ID. Modifications (FCC 15.21): Changes or
modifications to this equipment not expressly approved by
Synapse Wireless, Inc., may void the user’s authority to
operate this equipment.
CERTIFICATIONS
MODEL
:
IIOT-REPEATER
Contains FCC ID
:
U9O-RF200
Contains IC
:
7084A-RF200
UL File No
:
E346690
Contact Synapse for Support-
(877) 982-7888