DOC-1000560-B-1
CERTIFICATIONS
Certifications: c(UL)us, FCC/IC, RoHS
IC:
7084A-SM220
FCC ID:
U9O-SM220
UL File Number:
E513705
Type 1 Action, Polution Degree 2, Impulse Voltage 330V
RATINGS
Input Power: 12-24VDC or 24VAC, 50-60Hz
Max Current Draw: 60 mA @ 24VAC
Environment: 0C to +60C, 10 to 95% RH, non-
condensing
REGULATORY INFORMATION AND CERTIFICATIONS
RF Exposure Statement:
This equipment complies with
FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and
operated with minimum distance of 20cm between the
radiator and your body. This transmitter must not be co-
located or operating in conjunction with any other
antenna or transmitter.
Industry Canada (IC) certifications:
This digital
apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the
Radio Interference Regulations of the Canadian
Department of Communications.
Le present appareil numerique n’emet pas de bruits
radioelectriques depassant les limites applicable aux
appareils numeriques de la class B prescrites dans le
Reglement sur le brouillage radioelectrique edicte par le
ministere des Communications du Canada.
FCC certifications and regulatory information (USA
only)
FCC Part 15 Class B:
This device complies with part 15
of the FCC rules. Operation is subject to the following two
conditions: (1) These devices may not cause harmful
interference, and (2) These devices must accept any
interference received, including interference that may
cause harmful operation.
RADIO FREQUENCY INTERFERENCE (RFI) (FCC
15.105):
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Re-orient or relocate the receiving antenna; (2)
Increase the separation between the equipment and the
receiver; (3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected; (4) Consult the dealer or an experienced
radio/TV technician for help.
Declaration of Conformity (FCC 96-208 & 95-19):
Synapse Wireless, Inc. declares that the product name
“
CONTROL-485-101
” to which this declaration relates,
meet the requirements specified by the Federal
Communications Commission as detailed in the following
specifications:
• Part 15, Subpart B, for Class B equipment
• FCC 96
-208 as it applies to Class B personal computers
and peripherals
• This product has been tested at an External Test
Laboratory certified per FCC rules and has been found to
meet the FCC, Part 15, Emission Limits. Documentation is
on file and available from Synapse Wireless, Inc.
If the FCC ID for the module inside this product enclosure
is not visible when installed inside another device, then
the outside of the device into which this product is
installed must also display a label referring to the
enclosed module FCC ID. Modifications (FCC 15.21):
Changes or modifications to this equipment not expressly
approved by Synapse Wireless, Inc., may void the user’s
authority to operate this equipment.
CERTIFICATIONS
Model
: CONTROL-485-101
Contains FCC ID
:
U9O-SM220
Contains IC
:
7084A-SM220
UL File No
:
E513705
Contact Synapse for Support-
(877) 982-7888
Figure 2. 24VAC connections
Figure 3. 24VDC connections
Figure 4. RS-485/BACnet connections
connections