manualshive.com logo in svg

Symmons TA-10, Quick Start Manual, Page: 1 / 3

Share
Download
Symmons TA-10 Quick Start Manual Download Page 1

Replacing a TA-10 Spindle

 

1)  First, you need to make sure the water to the valve has been shut off. Then, we need to 
open the valve to the warm/hot position.  Utilizing your handle, rotate counter-clockwise un-
til the handle stops. 

2)  Using a wrench, rotate the cap assembly (T-12A) counter-clockwise until the cap (T-12A) 
and spindle assembly (TA-10) are removable from the valve body. 

Summary of Contents for TA-10

Page 1: ...een shut off Then we need to open the valve to the warm hot position Utilizing your handle rotate counter clockwise un til the handle stops 2 Using a wrench rotate the cap assembly T 12A counter clockwise until the cap T 12A and spindle assembly TA 10 are removable from the valve body ...

Page 2: ...Failure to do so can damage the cap and spindle and make it extremely difficult to remove the spindle from the valve Rotating the spindle counter clockwise remove the spindle from the cap as sembly 4 Take the new Spindle TA 10 and insert into the cap assembly T 12A Thread the new spindle TA 10 all the way into the cap clockwise until it rests flat against the spindle ...

Page 3: ...tridge back into the valve Using a wrench tighten the cap assembly T 12A back to the body of the valve in a clockwise rotation Close the valve body utilizing your handle and rotating clockwise until the valve closes Restore the water supply back to the valve and check for leaks ...

Reviews:

No comments