4
E
F
2) Install shower escutcheon (E) to
shower valve. Secure with two
screws (D).
1
E
D
2
1) Attach diverter handle or volume
control handle (F) to shower
escutcheon (E).
4) Install handle (A) to valve. Secure
with set screw (B).
A
1
2
B
5) Install tub spout (G) to pipe fitting.
Turn clockwise to secure.
1
G
2
Installation
Note:
For valve body installation, please
see valve body manual.
6) Remove slide bar ends (J1) from
slide bar flanges. Using flanges
as a guide, drill 1/8” pilot holes
into studs or wood blocking. With
slide bar (J) in position, secure to
wall using screws (I). Attach slide
bar ends (J1) to bar flanges.
J
3
3
3
I
J1
1
2
3) Install dome cover (C) to valve.
Turn clockwise to secure.
7) Disassemble slide assembly (L).
4
3
1
L1
L2
L3
L4
2
8) Install slide assembly (L) to slide
bar (J). Flat edge on (L2) and (L3)
must be aligned. Arrows on (L2)
and (L4) indicate bottom side.
2
1
5
3
4
SLIDE
SLIDE
LOCK
L1
J
L3
L4
L2
1
C
2
Note:
Adjust screw cap (L1) for ease
of movement of slide assembly.
Note:
Handle should be facing the
6 o’clock position.
Note:
Slide bar must be secured
with at least two of the three
screws (I) at each end.
