Symmetricom TimeSource 3100, User Manual

Page: 114 / 238

S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
4
114
TimeSource 3100
TL1 Reference
097-72020-01 Issue 9: November 2003
<errcde> Four-character mnemonic error code, which is one of the following:
EFON = equipment feature option not provided
ENEQ = not equipped
ICNV = command not valid
IDNV = invalid data in command
IDRG = invalid data range in command
IIAC = invalid aid in command
IICT = invalid correlation tag
IIDT
= invalid data parameter in command
IISP = invalid syntax or punctuation
IITA
= invalid tid
PIUI = invalid or duplicate uid or pid (privileged users only)
RALB = All units of requested type are busy
RCBY = circuit is busy
SCSN = invalid command sequence
SDBE = internal database error
SNIS = not in service
SNVS = not in a valid state
SRCN = requested condition currently exists
SRQN = request invalid
SWFA = working unit failed
<error message> Error code text message
<link> Communication link identifier.
<modifier> Equipment initiating the alarm or event message, which is one of
the following:
TS3100 = system software
GPS = GPS receiver software
RO-x = remote oscillator input
SPAN-x = E1 span input
<ntfcncde> Notification code showing the alarm severity, which is one of the
following:
CR = critical
MJ = major
MN = minor
<ocrdat> Occurrence date in the 8-digit form: yyyy-mm-dd (command) or
yyyy:mm:dd (response or message), where yyyy is the year, mm is
the month (01-12), and dd is the day of the month (01-31). For
example, May 3, 2000 is 2000-05-03.
<ocrtm> Occurrence time in the 6-digit form: hh-mm-ss (command) or
hh:mm:ss (response or message), where hh is hours (00 to 23),
mm is minutes (00 to 59), and ss is seconds (00 to 59). For
example, 2:34 pm is14:34:00.
Table J. Parameter Definitions (cont’d)