098-00564-000 Revision A3 – July, 2013
TimeProvider 2300/2700 User’s Guide
157
Chapter 3
TimeProvider 2300/2700 CLI Command Set
show snmp
Use these commands to display the SNMP Manager assigned to the agent, all
assigned users (username only), and the SNMP trap version and SNMP trap user.
Command Syntax:
To display the SNMP manager assignment:
show snmp manager
To display the SNMPv3 user configuration:
show snmp user
To display the SNMP TRAP user information (user names only):
show snmp trapuser
To display the SNMP v2-community information:
show snmp v2-community
To display the SNMP V2 state:
show snmp state-v2
To display the SNMP trap version:
show snmp trapversion
Example 1:
TP2700> show snmp manager
Response 1:
-----------------------------------------------------------------------------
|Index|Manager ID |Manager Addr |Engine ID |
|-----|---------------|--------------------|--------------------------------|
|1 |m192.168.5.187 |192.168.5.187 |0x63000000a1c0a805bb |
|.....|...............|....................|................................|
|2 |m192.168.5.144 |192.168.5.144 |0x0123456789010384 |
|.....|...............|....................|................................|
|3 |m192.168.5.171 |192.168.5.171 |0x63000000a1c0a805bb |
|-----------------------------------------------------------------------------
Example 2:
TP2700> show snmp user
Response 2:
