106
TimeProvider 2300/2700 User’s Guide
098-00564-000 Revision A3 – July, 2013
Chapter 3
TimeProvider 2300/2700 CLI Command Set
show log-config
Use this command to display the configuration for log size and remote-syslog.
Command Syntax:
To show configuration of the log size:
show log-config size {alarm-event | command | security}
To show configuration of the remote-syslog:
show log-config remote-syslog
Example 1:
To display size of the alarm log:
TP2700> show log-config size alarm-event
Response 1:
Log size of alarm-event log is : 100 kilobytes
Example 2:
To display the configuration of the remote-syslog:
TP2700> show log-config remote-syslog
Response 2:
Remote-syslog config:
State : disable
Remote Address : 0.0.0.0
Level :
User, Config, and Admin
set log-config
Use this command to provision the specified log file buffer size, the maximum
number of kilobytes to be stored in the file before it is rotated, and to configure a
remote syslog server to receive log messages from the TimeProvider 2700.
Command Syntax:
To configure the size of the log:
