manualshive.com logo in svg

Symmetricom SDU-2000e, Technical Reference, Page: 139 / 354

Share
Download
Symmetricom SDU-2000e Technical Reference Download Page 139

12713140-003-2  Revision E.01 – January 2007

SSU-2000e Technical Reference 139

Chapter 2 TL1 Reference

Set MTIE Parameters

Set MTIE Parameters

This command sets the input MTIE alarm thresholds (EL1 or EL2) and the clear 
thresholds (CL1 or CL2) for the specified input. This command is valid for DS1, E1, 
Sine, and GPS Input modules.

Syntax

SET-PRMTR-MTIE:[tid]:[aid]:ctag::[threshold],[t10],[t100],[t1k], 

[t10k],[t100k]; 

Related Commands

Retrieve MTIE Parameters

, on page 79

Parameter

Format

Description

aid

S1Ay[-z]

Sets the parameters for the specfied Input module [or 
port].

threshold

EL1 | EL2

Sets the input MTIE alarm threshold for the specified 
module [or port].

CL1 | CL2

Sets the clear threshold for the specified module [or port].

t10, 

t100, 

t1k, 

t10k, 

t100,

Sets the error limits in ns for the measurement time 
period.
Range = [0 – 60000]

Summary of Contents for SDU-2000e



































































































































































































































































































































































Reviews:

No comments