Status
Status
l
Senses signal presence on all inputs and outputs
l
Green/Red LEDs on front panel
l
Relay contact close on rear panel
l
RS-232 interface for monitor and control
EMC
The system has been tested and passed the following Electromagnetic Compatibility Standards that
are required for CE Mark.
Radiated Emissions, 30 MHz – 1 GHz
EN55022, Class A
Conducted Emissions, 150 kHz – 30 MHz
EN55022, Class A
Immunity Characteristics
EN55024, Class A
Electrostatic Discharge
EN61000-4-2
Radiated RF Immunity
EN61000-4-3
Electrical Fast Transient / Burst
EN61000-4-4
Surge Immunity
EN61000-4-5
Conducted RF Immunity
EN61000-4-6
Power Frequency H-Field Immunity
EN61000-4-8
Voltage Dips and Interruptions
EN61000-4-11
AC Harmonic Emissions
EN61000-3-2
AC Short and Long Term Flicker
EN61000-3-3
FCC Certification
The system has been tested and passed the following FCC Part 15 emissions requirements for Class
A performance.
Radiated Emissions
30 MHz – 1 GHz
Conducted Emissions
150 kHz – 30 MHz
FCC Class A Radiated and Conducted Emissions (see following notes).
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
Page 40
..........................................................................
9611B_UserGuide_RevA.pdf
