Symmetricom 5115A Operation And Maintenance Manual Download Page 62

Page: 62 / 106

6: Collecting and Viewing Data Locally

6.3 Taking or Yielding Local Control.

Please see

“3.2.3 User in Control”

on page 14 for an introduction about the user in control of the

test set.

To take

Local

control of the test set:

1. Perform an operation that requires control.

Start

Stop

data collection for example.

The reminder dialog stating that local control of the test set is required offers the
opportunity to take local control.

2. Press

Yes

to take local control.

Now that the test set is under

Local

control, any function that requires control can be

executed using the softkey interface, mouse or keyboard.

To yield

Local

control of the test set:

1. Access the

Settings

page (see

“4.1 The Settings Screen”

on page 21 for details).

2. Press

Network

3. Press the down arrow softkey until a push button on the row labeled

Operations

has focus

(denoted by a white rectangle).

The softkey interface displays a

PUSH

softkey.

4. Press the right arrow softkey until the

Yield Control

button is focused.

5. Press

PUSH

to push the

Yield Control

button.

6. Press

Return

to return to the previous screens.

Note

Yielding control is not strictly necessary. A

Remote

user can take control.

Summary of Contents for 5115A











































































































Search results

Summary of Contents for 5115A

Reviews:

Brands by name

Popular brands

Symmetricom 5115A, Operation And Maintenance Manual

Search results

Summary of Contents for 5115A

Reviews:

Brands by name

Popular brands