1/7
Quick Start Guide
DigIO 12x12 DSP
To download the latest version of SymNet Designer, the Windows application that
controls all SymNet hardware, go to: www.symetrixaudio.com
SymNet
TM
Audio Matrix
What Ships in the Box
R
A DigIO hardware device.
R
SymNet Designer CD-ROM (Windows).
R
A SymLink patch cable.
R
A ferrite clamp.
R
A detachable power cord.
R
This Quick Start Guide.
R
An RJ-45 Incompatibility Warning sheet.
What You Need to Provide
R
A Windows PC with 300MHz or
higher Pentium and:
• WIN 98SE, ME, 2000 or XP.
• 10-15 MB free storage space.
• 1024x768 graphics capability
• 16-bit or higher colors
• CD-ROM drive or Internet connection.
• 64MB RAM (WIN 98SE/ME), 128MB
RAM (WIN 2000/XP).
R
An available serial port capable of
operating at 57.6 or 115.2 kilobaud.
R
A straight-through RS-232 cable to
connect the serial port of your PC to
the DigIO’s rear RS-232 port. The
DigIO’s RS-232 input is a female DB-
9 connector.
Getting Help
SymNet Designer, the Windows applica-
tion that controls all SymNet hardware,
includes a help module which acts as
a complete user’s guide for both hard-
ware (including the DigIO) and software.
A printable copy is also available at
www.symetrixaudio.com.
If you have questions beyond the scope
of the help module, contact our Cus-
tomer Support Group in the following
ways:
Tel
(425) 778-7728
8:00 am to 4:30 pm
Monday through Friday,
Pacific Time
Web
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
This Class A Digital apparatus meets all
requirements of the Canadian Interference-
Causing Equipment Regulations
Cet appariel numerique de la classe A
respecte toutes les Exigences du Reglement
sur le materiel brouilleur du Canada.
Important Safety
Instructions.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation open-
ings. Install only in accordance with
the manufacturer’s instructions.
8. Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong are provided for your
safety. If the provided plug does not
fit into your outlet, consult an electri-
cian for replacement of the obsolete
outlet.
10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with the cart,
stand, tripod, bracket,
or table specified by
the manufacturer, or
sold with the apparatus.
When a cart is used, use caution
when moving the cart/apparatus com-
bination to avoid injury from tip-over.
13. Unplug this apparatus during light-
ning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in
any way, such as power-supply cord
or plug cord is damaged, liquid has
been spilled or objects have fallen
into the apparatus, the apparatus has
been exposed to rain or moisture,
does not operate normally, or has
been dropped.
AVIS:
NE PAS OUVRIR
Il ne se trouve a l’interieur aucune piece pourvant entre reparée l’usager.
SEE OWNERS MANUAL. VOIR CAHIER D’INSTRUCTIONS.
S’adresser a un reparateur compétent.
RISQUE DE CHOC ELECTRIQUE
No user serviceable parts inside. Refer servicing to qualified service personnel.
CAUTION
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE
DO NOT OPEN
RISK OF ELECTRIC SHOCK
The lightning flash with arrowhead
symbol within an equilateral triangle is
intended to alert the user of the pres-
ence of uninsulated “dangerous voltage”
within the product’s enclosure that may
be of sufficient magnitude to constitute
a risk of electric shock to persons. The
exclamation point within an equilateral
triangle is intended to alert the user of
the presence of important operating and
maintenance (servicing) instructions in
the literature accompanying the product
(i.e. this Quick Start Guide).
CAUTION
To prevent electric shock,
do not use the polarized plug supplied
with the unit with any extension cord,
receptacle, or other outlet unless the
prongs can be fully inserted.
WARNING
To reduce the risk of fire
or electric shock, do not expose this
apparatus to rain or moisture. Appa-
ratus shall not be exposed to dripping
or splashing and no objects filled with
liquids, such as vases, shall be placed
on the apparatus.
Power Source.
SymNet DigIO
hardware uses a switching power
supply that automatically adjusts to the
applied voltage. Ensure that your AC
mains voltage is somewhere between
100-240 VAC, 50-60 Hz. Use only the
power cord and connector specified for
the product and your operating locale.
A protective ground connection, by way
of the grounding conductor in the power
cord, is essential for safe operation. The
appliance coupler shall remain readily
accessible and operable once the unit is
installed.
User Serviceable Parts.
There
are no user serviceable parts inside
the SymNet DigIO. In case of failure,
customers inside the U.S. should refer
all servicing to the Symetrix factory.
Customers outside the U.S. should
refer all servicing to an authorized
SymNet distributor. Distributor con-
tact information is available online at
Before You Begin
