Symbol WSS 1000, Product Reference Manual

Page: 74 / 133

6-5
Operating the WSS 1000
Boot to Command Mode
Command Mode provides functions for:
•
Performing a Program Download to transfer an application program from the host
system to the WWC 1000 (refer to
Ending Communications on page 3-6 ).
•
Running the Self-Test program to verify that the hardware is operating properly
(refer to
Chapter 7, Maintainance and Troubleshooting ).
•
Performing a Memory Transfer to upload data from the WWC 1000 to the host
system (refer to
Chapter 7, Maintainance and Troubleshooting ).
To boot to Command Mode:
1. Press <ENTER+FUNC>.
2. Press and release the Power button.
3. Release <ENTER+FUNC>.