Symbol Series 6800, Product Reference Manual

Page: 19 / 138

1-6
Series 68XX Product Reference Guide
Before You Use the Terminal
The first time you use your 68XX terminal, or the first time you power it on after it has been
stored without the battery pack, follow these steps in order.
Install and Charge the Battery
1. Install a battery pack in the terminal. Refer to Chapter 6, Maintaining the Series
68XX , for instructions.
2. If you hear a repeated tone or see a message on the display, recharge or replace the
battery pack. Refer to Chapter 6, Maintaining the Series 68XX , for more
information.
Load the Appropriate Software
What software you load and how you load it depends on the environment in which it will be
used:
t
If this unit is intended for use in batch applications (68XX) or in a Spectrum One
network environment (6810), refer to
Chapter 3, Batch and Spectrum One Terminal
Setup , for information on downloading the software.
t
If this unit is intended for use in a Spectrum24 network environment (6840), refer to
Chapter 4, Spectrum24 RF Terminal Setup , for information on downloading the
software.