Symbol Series 6800, Product Reference Manual

Page: 113 / 138

E-2
Series 68XX Product Reference Guide
CFG24
The CFG24 utility enables the terminal operator to configure radio communications
parameters. This utility must be run after the radio driver loads because the configuration
parameters are saved in the radio card’s flash memory, which is accessed using the radio
driver services.
This program uses the text message file MSG.MSG which is read from the same drive and
directory as the CFG24 executable (CFG24.COM). Corrupted screens are an indication that
the message file was not found.
To ensure that all changes to parameters entered in CFG24 take effect, reinitialize (warm
boot) the 6840 after exiting.
Note: Changes to certain parameters (e.g., Terminal IP Address) do not take
effect until the TCP/IP stack is reloaded. Changes to other parameters
(e.g., Diversity) do not take effect until the driver is reloaded.
Syntax
CFG24
Description
CFG24 provides menus for editing the radio configuration parameters used to communicate
in a Spectrum24 network. These values are saved in a buffer in the radio card’s flash memory.
The current parameters are set in the file NET.CFG on the RAM disk. NET.CFG is used by
both the radio driver and the TCP/IP stack to obtain their configuration parameters.