4-3
Spectrum24 Terminal Setup
Initializing the Series 384X
To initialize a Series 384X which has LWP.HEX version 3.03 or greater loaded:
Note: This section covers specific settings required on first booting the Series
384X out of the box. For a complete review of the CFG24 screens,
refer to Appendix E, Spectrum24 Utilities.
1. Insert a charged battery in the Series 384X. Refer to Chapter 6 for instructions on
charging and installing a battery.
2. Cold boot the Series 384X.
For the 35-key 384X:
"
Press and hold <
#
+ SPACE + FUNC>.
"
Press and release PWR.
"
Release <
#
+ SPACE + FUNC>.
For the 46-key 384X:
"
Press and hold <A + B + D>.
"
Press and release PWR.
"
Release <A + B + D>.
3. The Series 384X loads software, then brings up the Spectrum24 Configurator
(CFG24) menu, shown in Figure 4-1.
Note: CFG24 comes up automatically after the first initialization out of the
box. On subsequent initializations, type CFG24 at the DOS prompt
to bring up the configurator.
Summary of Contents for Series 3800
