Symbol Series 3800, Reference Manual

Page: 113 / 138

E-1
Appendix E
Spectrum24 Network and Flash Disk Utilities
Introduction
Some supplemental utilities are provided for working with the flash disk in addition to the
Flash disk driver and utilities described in the Series 3000 ADK (refer to the section on
FLASHDSK.SYS in the Device Driver chapter of the Series 3000 Application Programmer’s
Reference Manual. These utilities include:
CFG24 executes from a DOS prompt to change parameters for radio
communications.
DIAG24 executes from a DOS prompt to test radio connectivity and
performance.
BOOTP is automatically executed by the start-up procedure. Obtains IP
address and sets up communications parameters. Should NOT be
executed from a DOS prompt.
STAT24 is automatically executed by the start-up procedure. Indicates the
status of the radio connection. Should NOT be executed from a
DOS prompt.
FLASH.BAT facilitates performing flash disk housekeeping functions, such as
copying files to, deleting files from, and renaming files on the
flash disk. Executes from a DOS prompt.