Symbol SE 923, Integration Manual

Page: 65 / 238

5-13
Parameter Menus
Triggering Modes
Parameter # 0x8A
Choose one of the options below to trigger the scan engine. Bar codes and option numbers
are on the following page.
•
Level - A trigger pull activates the laser and decode processing. The laser
remains on, and decode processing continues until a trigger release,
a valid decode, or the Laser On Time-out is reached.
•
Pulse - A trigger pull activates the laser and decode processing. The laser
remains on and decode processing continues until a valid decode, or
the Laser On Time-out is reached.
•
Continuous - The laser is always on and decoding.
•
Blinking - This trigger mode is used for triggerless ScanStand operation.
Scanning range is reduced in this mode. This mode cannot be used
with scanners that support an aim mode (see Table 6-10 on page 6-
27).
•
Host - Triggering signal comes from a host command. Any actual trigger
pull will be interpreted by the scan engine as a Level triggering
option.
LEVEL
(0X00)