Symbol SE 2223, Integration Manual

Page: 13 / 260

xii
SE 2223/3223 Scan Engine Integration Guide
• Chapter 8, Application Notes explains electrical characteristics and timing
waveforms.
• Chapter 9, Parameter Menus provides the bar codes necessary to program your
scan engine.
• Appendix A, Miscellaneous Programming Information provides general
programming information, such as the UCC/EAN-128 convention, AIM Code
identifiers, and prefix and suffix values.
Notational Conventions
The following conventions are used in this document:
• Bullets indicate:
• action items
• lists of alternatives
• lists of required steps that are not necessarily sequential
• Sequential lists (e.g., those that describe step-by-step procedures) appear as
numbered lists.
Related Documents
The following documents provide more information for the SE 2223/3223 Scan Engine.
• Simple Serial Interface (SSI) Programmer’s Guide, p/n 72-40451-XX.
• Simple Serial Interface (SSI) Developer’s Guide, p/n 72E-50705-XX.
Service Information
If you have a problem with your equipment, contact the Symbol Support Centers . Before
calling, have the model number, serial number, and several of your bar code symbols at
hand.
Call the Support Center from a phone near the scanning equipment so that the service
person can try to talk you through your problem. If the equipment is found to be working
properly and the problem is symbol readability, the Support Center will request samples of
your bar codes for analysis at our plant.
If your problem cannot be solved over the phone, you may need to return your equipment
for servicing. If that is necessary, you will be given specific directions.