!
Do not force any connectors to-
gether if they do not connect easily;
you could damage them.
3.
Gently slip the cable’s micro DB-15 connector into
the PTC’s micro DB-15 connector.
4.
Connect the other end of the cable to the
computer or accessory. Make sure the connectors
line up correctly.
5.
Turn on the PTC and then turn on the device it is
connected to.
6.
Follow the instructions for your application
program to communicate.
Disconnecting a cable
Always disconnect connectors by pulling them directly
away from each other. Do not pull at an angle or use a
rocking or twisting motion.
1.
Turn off the PTC.
2.
Turn off the device the PTC is connected to.
!
Pull on the cable connector’s head
when disconnecting. Pulling on the
cable can break the internal wires.
3.
Grasp the cable connector head and remove it
from the PTC’s micro DB-15 connector.
4.
If necessary, disconnect the other end of the cable
from the computer or accessory.
Connecting to the optional communication
cradle
See the manual provided with the SC-960L
Single-bay Communication Cradle for instructions on
how to connect the PTC-960L to the cradle.
24
