Disconnecting a parallel cable
1.
Turn off the PTC and the parallel device.
!
Pull on the cable connector when
disconnecting. Pulling on the cable
can break the internal wires.
2.
Pull the cable’s connector directly away from the
PTC’s parallel port.
3.
If necessary, disconnect the other end of the cable
from the parallel device.
Using the radio
!
If your PTC has an internal radio,
do not turn on the PTC or attempt
to transmit data unless the antenna
is attached; otherwise, the radio
may be damaged.
All radio communication is controlled by your
organization’s application program. See the
information provided with the program for details
on using the radio to transmit and receive data.
38
