DOC statement
The PTC-870IM’s MicroRadio is also approved for use
in Canada. No license is required for operation.
This device complies with RSS-210 of Industry and
Science Canada. Operation is subject to the following
two conditions: (1) this device may not cause
interference, and (2) this device must accept any
interference, including interference that may cause
undesired operation of the device.
If your PTC contains an ARDIS radio
The PTC-870IM’s internal transmitter has been type
accepted in accordance with FCC CFR Title 47, Part
90. The FCC ID, Canadian DOC ID, or ID number for
another appropriate regulatory agency is on a label on
the back of the PTC.
You must subscribe to the ARDIS radio network
(U.S.), Bell-Mobility (Canada), or the DataTAC
system carrier in the country of operation before
using the internal ARDIS radio. You will need to
provide the logical link identifier (LLI) number from
the label on the rear of the unit for registration on the
network. See your Telxon representative for
information on subscribing to the network in the
country in which the PTC will be used.
No license is required to operate this product in the
U.S. or Canada. For information on operating
regulations in other countries, see your Telxon
representative.
11
