Symbol PPT 8800 Product Reference Manual Download Page 65

Page: 65 / 328

2-15

Operating the PPT 8800

Resetting the Terminal

If the terminal stops responding to input, reset it.

Performing a Soft Reset

A soft reset restarts the terminal and saves all stored records and entries.

Caution

Files that remain open during a soft reset may not be retained.

DO NOT perform a soft reset if the terminal is suspended. Press the power
button to wake the terminal.

To perform a soft reset on the Standard 6-key keypad, press the Enter and

keys while

holding down either the left or right scan trigger and then releasing the keys.

To perform a soft reset on the 15-key keypad, press

and

keys while holding

down either the left or right scan trigger and then releasing the keys.

Performing a Hard Reset

A hard reset also restarts the terminal, but erases all stored records and entries.

Therefore,

never perform a hard reset unless a soft reset does not solve the problem.

Note: You can restore any data previously synchronized with a computer

during the next ActiveSync operation. See

Chapter 4,

Communications

for detailed ActiveSync instructions.

To perform a hard reset:

Remove the battery cover.

Summary of Contents for PPT 8800









































































































































































































































































































































Search results

Summary of Contents for PPT 8800

Reviews:

Related manuals for PPT 8800

Brands by name

Popular brands

Symbol PPT 8800, Product Reference Manual

Search results

Summary of Contents for PPT 8800

Reviews:

Related manuals for PPT 8800

Brands by name

Popular brands