Symbol PPT 8800 Product Reference Manual Download Page 194

Page: 194 / 328

6-18

PPT 8800 Series Product Reference Guide for Embedded Windows

CE .NET

adapter has been out of the Ad Hoc network. Tap

Refresh

to update the

Peers

tab

to the latest Ad Hoc network performance and terminal membership data.

Figure 6-13. Mobile Companion - Peers Tab

Setting Options

Select

Options

from the Mobile Companion menu to enable or disable international

roaming, configure consumption avoidance capabilities, enable system sounds, and set
temporary settings.

Figure 6-14. Mobile Companion - Option Settings

Select the

Access AP networks

checkbox to display available AP networks and

their signal strength within the

Available WLAN Networks

tab. These are the APs

available to the terminal profile for association. If this option was previously
disabled, refresh the

Available WLAN Networks

tab to display the AP networks

available to the terminal.

Select the

Access Ad-Hoc networks

checkbox to display available peer (adapter)

networks and their signal strength within the

Available WLAN Networks

tab. These

are peers available to the terminal profile for association. If this option was

Summary of Contents for PPT 8800









































































































































































































































































































































Search results

Summary of Contents for PPT 8800

Reviews:

Related manuals for PPT 8800

Brands by name

Popular brands

Symbol PPT 8800, Product Reference Manual

Search results

Summary of Contents for PPT 8800

Reviews:

Related manuals for PPT 8800

Brands by name

Popular brands