Symbol PDT 8100 Series, Product Reference Manual

Page: 45 / 402

1-25
Getting Started
LED Indicators
Note: Charging LED indicators are on cradles.
Table 1-1. Charging the Battery in the Terminal
LED Status Indication
Using the Serial Charging Cable
The Serial Charging Cable has no LED. For the terminal’s battery status, view the
Power screen on the terminal in System Settings.
Using the Snap-on Modem Module
The Snap-on Modem Module has no LED. For the terminal’s battery status, view
the Power screen on the terminal in System Settings.
Using the Snap-on Charging Adapter
Solid Green Charging Adapter is plugged into the accessory
outlet (cigarette lighter receptacle) of your vehicle.
For the terminal’s battery status, view the Power
screen on the terminal in System Settings.
Using Single Slot Cradles
No Light No cradle power present, no terminal inserted in
cradle, or terminal is not seated in cradle slot.
Solid Red Terminal battery is charging or the terminal is in a
mode requiring a higher current draw from the
cradle.
Note: The Terminal Battery Charge Status LED
may flicker when the terminal is in a mode requiring
a higher current draw.
Solid Green The battery is fully charged.
Using the CHS 8100-4000C 4-Slot Cradle
No Light Cradle is not powered; terminal(s) not placed
correctly; or, there is no terminal in the cradle.
Solid Red Terminal battery is charging.