Symbol PDT 8000, Product Reference Manual

Page: 359 / 376

E-1
Appendix E
Keyboard Maps
Introduction
This appendix contains the keyboard map for the keyboard configuration of the terminal.
Each key is listed in the table with its value, depending on the state of the keyboard.
As shown below, when the key is pressed on the keyboard, the default state displays
the number ‘1’. After pressing the Shift key, the press of the ‘1’ key acts as a Clear button.
In addition to key values, VK codes and ASCII values are listed for each key, where
applicable.
Key Default State Shift State
VK
Code
(Decimal)
ASCII
Value
(Decimal)
1 49 49
Clear 46