Symbol PDT 8000 Product Reference Manual Download Page 336

Page: 336 / 376

B-22

PDT 8000 Series with Windows

Mobile 2003 Software for Pocket PCs Product Reference Guide

Audio Settings

Select Audio Settings on the Control Panel to specify the beeper volume and view the
version numbers for the Audio and Notify APIs.

Figure B-23. Audio Settings Screen

•

Tap Beeper Volume to toggle the beeper volume between low, medium, and high.
As you change the value, the beeper sounds to demonstrate the level.

•

API Version displays the version number of the Audio API.

•

Notify API Version displays the version number of the Notify API.

Summary of Contents for PDT 8000

























































































































































































































































































































































































Search results

Summary of Contents for PDT 8000

Reviews:

Related manuals for PDT 8000

Brands by name

Popular brands

Symbol PDT 8000, Product Reference Manual

Search results

Summary of Contents for PDT 8000

Reviews:

Related manuals for PDT 8000

Brands by name

Popular brands