Symbol PDT 8000, Product Reference Manual

Page: 138 / 376

4-38
PDT 8000 Series with Windows
®
Mobile 2003 Software for Pocket PCs Product Reference Guide
Launching the Internet
1. Review the configuration of the cradle using the MobileDox Cradle Manager.
2. On the terminal, tap Start - Settings - System - eConnect and ensure the following
settings are made:
Figure 4-19. eConnect Settings - Launching the Internet via Ethernet
3. Tap the
OK
button.
4. Insert the terminal into the cradle. The cradle’s communication LED turns red, then
flashes green, indicating that the host computer and terminal are communicating.
See
Communication LED Indicator on page 4-39 for other indications.
5. On the terminal, a succession of dialog boxes appear, indicating the status of the
connection.
6. Once connected, tap Start - Internet Explorer to launch the browser.
7. To close your internet session, tap the two arrows on the navigation bar to expose
the Connected dialog box, then tap the
End
button. You may remove the terminal
when the connection has closed itself.
Updating Cradle Firmware
1. Ensure that your .bin update file is located in Program Files\Symbol\MobileDox\FW
on your host computer.
2. In the MobileDox Cradle Manager screen, select the cradle whose firmware you
want to update.