Symbol PDT 8000, Product Reference Manual

Page: 110 / 376

4-10
PDT 8000 Series with Windows
®
Mobile 2003 Software for Pocket PCs Product Reference Guide
Note: eConnect is used only when establishing a connection using the
Single-Slot Modem Cradle, the Snap-On Modem and the Four-Slot
USB-to-Ethernet cradle.
To install eConnect:
1. Download eConnect (for PDT 8000) from http://devzone.symbol.com .
2. Establish a serial connection between your terminal and host computer, using a
serial device (for example, see
Using the Serial Charging Cable on page 4-12).
3. Copy the eConnect file you downloaded in step 1 into the Applications folder of the
terminal.
4. On the terminal, tap Start - Programs - File Explorer.
5. Go to your Applications folder and tap the eConnect file you copied in step 3.
eConnect will install on your terminal.
Installing MobileDox Cradle Manager
Note: MobileDox Cradle Manager is used only when establishing a
connection using the Four-Slot USB-to-Ethernet Cradle.
The Cradle Management software allows you to:
• View cradles that are attached to the network via MobileDox Net
• View cradle status
• Modify cradle settings including:
• IP address settings
• DNS and WINS settings
• Identification settings
• USB port specific settings
• Restart cradles connected to the network via MobileDox Net
• Update the firmware of MobileDox Net.
To install the Cradle Management Software on your host computer, download the latest
version of the software from
http://devzone.symbol.com . Refer to the instructions included
with the software you download.