Symbol PDT 1100, Product Reference Manual

Page: 54 / 124

4-10
PDT 1100 Terminal Product Reference Guide
System Environment Setting
To change system settings:
1. Select "4: SET SYSTEM" on the System Menu.
The following screen displays:
2. Select an item from the Set System menu.
• Press 1 to set an execution program that runs when the terminal powers on.
Table 4-2. Upload Error Problems and Solutions
Error Message Problem Solution
File Error! The file you
attempted to upload is
damaged. To upload the damaged file as is, press the 1 key.
Press the 2 key to abort the file upload.
XXXXXXX.XXX
Communication
error! Uploading has failed. To retry uploading, press the 1 key. To return to the
SYSTEM MENU, press the 2 key. Check the
interface port and communications parameters in
the SET SYSTEM menu or perform the
communications test in the TEST menu. Also check
the communications parameters setup of the host
computer.
SYSTEM MENU
1:EXEC PROGRAM
2:DOWNLOAD
3:UPLOAD
4:SET SYSTEM
5:TEST 6:VER
SET
SYSTEM
1:
PROGRAM
2: DISPLAY
3: DATE/
TIME
4:BARCODE
6: COM
7: KEY