Symbol P470/P370, Product Reference Manual

Page: 41 / 208

3-9
Operation
App. Control
App. Control allows you to control your application, specifically, load new applications on
your scanner, reset your default applications, etc.
You can load a new application or system code by either scanning the appropriate bar code
or entering the appropriate keypad value as indicated on the display.
Option Description
0. Load App Puts the scanner into a mode to receive MCL-Designer
application downloads and MCL-Link commands from the host.
To enter this mode using the key pad, select this option on the
system menu. The following screen displays:
OR
To enter this mode from an application without entering the
system menu or entering key strokes, scan the bar code below.
When this screen displays, the scanner is ready to accept the
download. On the PC Utility, initiate the download.
After downloading is complete, the system menu is exited and
the application initiated.
To exit this mode and prevent the download of a new application,
press the <FUNC> then <BK> keys.
Load New App.
<ENTER>=YES
<BK>=NO
Load New MCL-Designer Application
Scanner ready,
on PC start download