Symbol P360, Product Reference Manual

Page: 44 / 198

3-12
P460/P360 Memory Scanners Product Reference Guide
1. Set Default App Reinstalls the default application and returns all parameters to
their factory settings (values listed in
Table 5-1 ). The default
application overwrites any MCL-Designer application and/or ADF
rules. This option may be used to restore functionality to a
scanner which has been loaded with a defective application.
To enter this mode using the key pad, select this option on the
system menu. Prior to resetting the default application, the user
is prompted to confirm this operation:
Press the <ENTER> key to confirm the choice (Yes) or the <BK>
key to cancel the choice (No).
If you entered “Set Default App” from the System Menu, upon
resetting the default application, you will return to the System
Menu.
OR
To enter this mode from an application without entering the
system menu, scan the bar code below.
If you entered the “Set Default App” mode using the bar code
above, the default application will automatically be reset, the
System Menu exited, and the application re-initiated.
Option Description
Reset Default App?
<Enter>=Yes
<BK>=No
Reset Default Application
(Clears previously programmed ADF rules and/or
MCL-Designer applications)