Symbol P360, Product Reference Manual

Page: 187 / 198

C-1
Appendix C
Messages and Error Codes
Introduction
This chapter contains information on messages displayed on the scanner.
Messages
The scanner displays messages when certain actions are performed. If the scanner
displays a message that is unfamiliar, contact the Symbol Support Center on page -xi.
Table C-1. Scanner Messages
Message Description
Unit Cradled Scanner is properly inserted in the cradle
Battery Temperature Out Of
Range Battery temperature is out of range. Contact a
Symbol Support Center on page -xi.
Upload Failed. Retry
<Enter>=Yes <BK>=No • After putting the scanner in the mode to
transmit batch data to the host, it was not
placed in the cradle or attached to a cable
within the required 30 seconds.
• Communication failure with host due to host or
cabling problems. Use the beeper indications to
track the message. See Beeper Indications on
page 4-9.