Symbol P 370 RF, Reference Manual

Page: 66 / 183

5-6
P 370/470 RF Scanner Product Reference Guide
The following table lists the defaults for all parameters. If you wish to change any option,
scan the appropriate bar code(s).
Table 5-1. Default Table
Parameter Default Page Number
Set Default Parameter All Defaults 5-11
RS-232 Host Type Standard 5-12
Host Response Timeout 5 seconds 5-15
RF Channel No Default Setting 5-16
RF Retries 4 5-16
Sleep Time 10 seconds 5-18
Decimal Separator Decimal Point (.) 5-19
Key Click Enabled 5-20
Beeper Tone High Frequency 5-21
Beeper Volume High 5-22
Power Detect Beep Enabled 5-23
Laser On Time 3.0 seconds 5-24
Beep After Good Decode Enabled 5-25
Transmit “No Read” Message Disabled 5-26
Linear Code Type Security Levels 1 5-27
Bi-directional Redundancy Disabled 5-29