Symbol P 370 RF, Reference Manual

Page: 40 / 183

3-8
P 370/470 RF Scanner Product Reference Guide
Symbol Technologies
Phaser RF
Figure 3-4. Banner Screen
After 10 seconds, the System Banner is replaced by the system initialization screen:
SYMBOL TECHNOLOGIES
INITIALIZING ...
Figure 3-5. Initialization Screen
and finally, the scanner enters the POS scanning screen.
POS Application
In POS mode, the scanner can transmit bar codes and optional quantities to the cradle. The
POS screen appears as follows:
SKU:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Figure 3-6. POS Application Screen
Scanned bar codes automatically transmit to the host. Keyed bar codes transmit once you
press the <ENTER> key. To enter a quantity, press the * key prior to scanning or keying any
bar code data. Once you press the * key, the following screen appears:
Quantity:
_ _ _ _ _
Figure 3-7. POS Quantity Screen
Key in a quantity followed by the <ENTER> key. The SKU entry screen reappears. Scan or
enter a SKU. The scanner sends the SKU to the host the keyed-in amount of times. For
instance, if you type in a quantity of 6, the scanner sends that SKU to the host six times as if
the SKU were scanned six times.
System Menu
The system menu contains utilities to allow the user to set up the scanner. To access the
System Menu, press the <FN>* key combination to reset the scanner, and then <FN><BK>