manualshive.com logo in svg

Symbol P 300FZY, Product Reference Manual, Page: 69 / 325

Share
Download
Symbol P 300FZY Product Reference Manual Download Page 69

2-33

Programming the Scanner

Decode UPC/EAN Supplementals

Supplementals are additionally appended characters (2 or 5) according to specific code 
format conventions (e.g., UPC A+2, UPC E+2, EAN 8+2). Three options are available.

!

If UPC/EAN with supplemental characters is selected, UPC/EAN symbols without 
supplemental characters are not decoded.

!

If UPC/EAN without supplemental characters is selected, and the P 300 Series 
scanner is presented with a UPC/EAN plus supplemental symbol, the UPC/EAN 
is decoded and the supplemental characters ignored.

!

An autodiscriminate option is also available. If this option is selected, choose an 
appropriate 

Decode UPC/EAN Supplemental Redundancy

 value from the next page. 

A value of 5 or more is recommended.

Note: To minimize the risk of invalid data transmission, select whether to 

read or ignore supplemental characters.

Decode UPC/EAN with Supplementals

Ignore UPC/EAN with Supplementals

Autodiscriminate UPC/EAN Supplemental 

Summary of Contents for P 300FZY






































































































































































































































































































































Reviews:

No comments