Symbol ORG SPT 1550, Product Reference Manual

Page: 90 / 272

5-4
SPT 1550 Product Reference Guide
Calculator Menu Commands
The Calculator supports Copy and Paste commands. You can use these commands to
copy a value from the Calculator and paste it into another application on your SPT 1550
terminal. Similarly, you can copy values from other applications on your SPT 1550 terminal
and paste the values into the Calculator. For additional information on the Copy and Paste
commands, refer to
Using Menus
on page 2-20.
Clears the entire calculation to begin a new calculation.
Toggles the current number between a negative and positive value. If
you want to enter a negative number, enter the number first and then
press the +/- button.
Places the current number into Memory. Each new number you enter
with the M+ button is added to the total already stored in memory. The
number that you add can be either a calculated value, or any number
you enter by pressing the number buttons. Pressing this button has no
effect on the current calculation (or series of calculations); it merely
places the value into memory until it is recalled.
Recalls the stored value from memory and inserts it in the current
calculation.
Removes any value stored in the Calculator memory.