Symbol ORG SPT 1550, Product Reference Manual

Page: 208 / 272

11-6
SPT 1550 Product Reference Guide
Locking Your SPT 1550 Terminal
You can also lock your SPT 1550 terminal, so that you need to enter your password to
operate it.
Important: If you lock your SPT 1550 terminal as described in the following procedure, you
need to enter the exact password to re-activate your SPT 1550 terminal. If you forget the
password, you must perform a hard reset to resume using your SPT 1550 terminal. Using
the reset button deletes all the entries in your SPT 1550 terminal; however, you can restore
all synchronized data at the next HotSync operation. For information about how to use the
reset button,
Performing a Hard Reset on page 16-5.
To lock your SPT 1550 terminal with a password:
1. Use the HotSync application to synchronize the data between your SPT 1550
terminal and your computer. Refer to
Chapter 7,
Applications: HotSync®
for
information about how to use the HotSync application.
2. Assign a password as described in Assigning a Password on page 11-3.
3. Tap the
Lock & Turn Off
button in the Security screen to open the System Lockout
screen.
4. Tap the Off & Lock button to turn off the power for your SPT 1550 terminal.
5. Start your SPT 1550 terminal and enter the password.
Tap here